Canon EF-M18-55MM F3.5-5.6 IS STM

Canon EF-M18-55MM F3.5-5.6 IS STM ръководство на потребителя

(1)
  • ENG-1
    Wide end
    Telephoto end
    Zoom ring
    ENG
    EF-M LENS Instructions
    EF-M18-55mm f/3.5-5.6 IS STM
    Nomenclature
    Focusing ring
    Hood mount
    Filter Mounting Thread
    Lens mount index
    Contacts
    Zoom position index
    Zoom ring
    Thank you for purchasing a Canon product.
    The Canon EF-M18-55mm f/3.5-5.6 IS STM lens is a 3x
    standard zoom lens developed for interchangeable-lens digital
    cameras compatible with EF-M lenses*.
    * Only the following cameras are compatible with EF-M lenses (as
    of July 2012):
    EOS M
    "IS" stands for Image Stabilizer.
    "STM" stands for stepping motor.
    Safety Precautions
    Do not look at the sun or a bright light source through the
    lens. Doing so could result in vision loss or blindness.
    Whether it is attached to the camera or not, do not leave
    the lens under the sun without the lens cap attached. This
    is to prevent the lens from concentrating the sun’s rays, which
    could cause a fire.
    Handling Cautions
    If the lens is taken from a cold environment into a warm
    one, condensation may develop on the lens surface and
    internal parts. To prevent condensation in this case, first
    put the lens into an airtight plastic bag before taking it from a
    cold to warm environment. Then take out the lens after it has
    warmed gradually. Do the same when taking the lens from a
    warm environment into a cold one.
    Do not leave the lens in excessive heat such as in a car in
    direct sunlight. High temperatures can cause the lens to
    malfunction.
    Please also refer to the handling cautions found in your
    camera’s instructions.
    Conventions used in this instruction
    Warning to prevent lens or camera malfunction or
    damage.
    Supplementary notes on using the lens and taking
    pictures.
    This device complies with Part 15 of the FCC Rules. Operation is
    subject to the following two conditions: (1) This device may not cause
    harmful interference, and (2) this device must accept any interference
    received, including interference that may cause undesired operation.
    Do not make any changes or modifications to the equipment unless
    otherwise specified in the instructions. If such changes or modifications
    should be made, you could be required to stop operation of the
    equipment.
    This equipment has been tested and found to comply with the limits for
    a class B digital device, pursuant to part 15 of the FCC Rules. These
    limits are designed to provide reasonable protection against harmful
    interference in a residential installation. This equipment generates, uses
    and can radiate radio frequency energy and, if not installed and used
    in accordance with the instructions, may cause harmful interference to
    radio communications.
    However, there is no guarantee that interference will not occur in a
    particular installation. If this equipment does cause harmful interference
    to radio or television reception, which can be determined by turning
    the equipment off and on, the user is encouraged to try to correct the
    interference by one or more of the following measures:
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment and receiver.
    Consult the dealer or an experienced radio/TV technician for help.
    This Class B digital apparatus complies with Canadian ICES-003.
    1. Mounting and Detaching the Lens
    See your camera’s instructions for details on mounting and
    detaching the lens.
    After detaching the lens, place the lens with the rear end
    up to prevent the lens surface and contacts from getting
    scratched. (fig.)
    If the contacts get soiled, scratched, or have fingerprints on
    them, corrosion or faulty connections can result. The camera
    and lens may not operate properly.
    If the contacts get soiled or have fingerprints on them, clean
    them with a soft cloth.
    If you remove the lens, cover it with the dust cap. To attach
    it properly, align the lens mount index and the index of the
    dust cap as shown in the diagram, and turn clockwise. (fig.)
    To remove it, reverse the order.
    2. Zooming
    Turn the lens’ zoom ring to adjust the size of the photo field or
    subject. (fig.)
    For wide shots, turn the zoom ring toward the wide end.
    For close-ups, turn the zoom ring toward the telephoto end.
    Be sure to finish zooming before focusing. Zooming after
    focusing can affect the focus.
    Blurring may temporarily occur if the zoom ring is quickly
    rotated.
    Zooming during still image exposure will result in delayed
    focus. This causes any streaks of light that are captured
    during exposure to be blurred.
    3. Manual Focus
    When the camera’s focus mode is set to [MF], focus manually by
    turning the focusing ring (fig.).
    Quickly rotating the focusing ring may result in delayed focus.
    Focus mode is set using the camera. Please refer to the
    camera’s instructions.
    After autofocusing in [AF+MF] mode, focus manually by
    pressing the shutter button halfway and turning the focusing
    ring (full-time manual focusing).
    4. Image Stabilizer
    This lens is equipped with an Image Stabilizer. This function
    corrects camera shake, allowing users to capture sharp images.
    Also, the Image Stabilizer automatically provides optimal image
    stabilization depending on shooting conditions (such as shooting
    still subjects and following shots). Please set the Image Stabilizer
    ON or OFF using the camera settings. See your camera’s
    instructions for details.
    The Image Stabilizer cannot compensate for a blurred shot
    caused by a subject that moved.
    The Image Stabilizer may not be fully effective if you shoot
    from a violently shaking vehicle or other transportation.
    The Image Stabilizer consumes more power than normal
    shooting, so fewer shots can be taken if you use the
    function.
    When shooting a still subject, it compensates for camera
    shake in all directions.
    It compensates for vertical camera shake during following
    shots in a horizontal direction, and compensates for
    horizontal camera shake during following shots in a vertical
    direction.
    When you use a tripod, the Image Stabilizer should be
    turned off to save battery power.
    Even with a monopod, the Image Stabilizer will be as
    effective as during hand-held shooting.
    However, depending on the shooting environment, the
    Image Stabilizer effect may be less effective.
    ■ Dynamic IS Function (Movie shooting only)
    The EF-M18-55mm f/3.5-5.6 IS STM is equipped with dynamic IS,
    effective when shooting while walking since it expands the IS range.
    Achieves effective IS at the wide end.
    Automatically activates when the camera is set to Movie
    Shooting.
    CT1-8583-001
    COPY
Canon EF-M18-55MM F3.5-5.6 IS STM

Имате ли въпрос относно Canon EF-M18-55MM F3.5-5.6 IS STM?

Брой въпроси: 0

Задайте въпроса, който имате за Canon EF-M18-55MM F3.5-5.6 IS STM тук направо на други собственици на продукта. Дайте ясно и изчерпателно описание на проблема и Вашия въпрос. Колкото по–добре опишете проблема си и зададете въпроса си, толкова по–лесно другите собственици на Canon EF-M18-55MM F3.5-5.6 IS STM ще могат да Ви дадат добър отговор.

Тук вижте безплотното ръководство за Canon EF-M18-55MM F3.5-5.6 IS STM. Прочетохте ли ръководството, но отговаря ли то на Вашия въпрос? Тогава задайте въпроса си на тази страница на други собственици на Canon EF-M18-55MM F3.5-5.6 IS STM. Задайте въпроса си тук