Cateye Strada RD200 Cadence ръководство на потребителя

Cateye Strada RD200 Cadence
(1)
  • Брой стр.: 2
  • Вид файл: PDF
MENUMENUMENUMENUMODEMODEMODEMODEMODEMODETire circumferencereference table
12 x 1.75
14 x 1.50
14 x 1.75
16 x 1.50
16 x 1.75
18 x 1.50
18 x 1.75
20 x 1.75
20 x 1-3/8
22 x 1-3/8
22 x 1-1/2
24 x 1
24 x 3/4
Tubular
24 x 1-1/8
24 x 1-1/4
24 x 1.75
24 x 2.00
24 x 2.125
26 x 7/8
26 x 1
(
59
)
26 x 1
(
65
)
26 x 1.25
26 x 1-1/8
26 x 1-3/8
26 x 1-1/2
26 x 1.40
26 x 1.50
26 x 1.75
26 x 1.95
26 x 2.00
26 x 2.10
26 x 2.125
26 x 2.35
26 x 3.00
27 x 1
27 x 1-1/8
27 x 1-1/4
27 x 1-3/8
650 x 20C
650 x 23C
650 x 35A
650 x 38A
650 x 38B
700 x 18C
700 x 19C
700 x 20C
700 x 23C
700 x 25C
700 x 28C
700 x 30C
700 x 32C
700C Tubular
700 x 35C
700 x 38C
700 x 40C
29 x 2.1
29 x 2.3
935
1020
1055
1185
1195
1340
1350
1515
1615
1770
1785
1753
1785
1795
1905
1890
1925
1965
1920
1913
1952
1953
1970
2068
2100
2005
2010
2023
2050
2055
2068
2070
2083
2170
2145
2155
2161
2169
1938
1944
2090
2125
2105
2070
2080
2086
2096
2105
2136
2146
2155
2130
2168
2180
2200
2288
2326
Tire size L (mm)MENUMENUMODEMODE
L mm
AC
MENU
MODE
MODEMODEWhen the computer ismounted on the bracket
5
6
9
8
2
1
3
4
7
3 mm
1
9
4
9
6
9
3
5
5
2
2
1
2
1
8
8
4
9
44
6
33
5
5
3
Pull
securely
Pull
securelyPull securely

CATEYE STRADA CADENCE

CYCLOCOMPUTER CC-RD200

U.S. Pat. Nos. 5236759/6957926 Pat./Design Pat. PendingCopyright© 2007 CATEYE Co., Ltd.CCRD20-070727 066600520 4
ENG
Before using the computer, please thoroughly read this manual and keep it forfuture reference.Preparing the computer
AC
1
2
3
4
km/h mphIncreaseMove digits(by pressing& holding)Registerthe settingRegister
the
settingClear all data (initialization)Press the AC button on the back.Select the desired speed unitsSelect “ ” or “ ”.Enter the tire circumferenceEnter the tire circumference of your bicycle in
mm.
* Refer to the tire circumference reference table.Set the clockWhen MODE is pressed and held, “Displayed time”,“Hour”, and “Minute” will appear, in this order.24h 12h, orincreasethe valueSwitch thescreen ormove digits(by pressing& holding)Registerthe setting(finish)Measure wheel circumference (L) of your bikeTo get the most accurate calibration do a wheel rollout. With the valve stem perpendicular to theground, mark the pavement at the valve stem. Withthe riders weight on the bike, roll the wheel one tirerevolution in a straight line and mark the groundwhen the valve stem is perpendicular to the groundagain. Measure the distance in millimeters. This isthe most accurate wheel calibration number. : Speed unit : Wheel size iconPush!Battery case coverContact WARNING / CAUTION• Do not concentrate on the computer while riding. Ride safely!• Install the magnet, sensor, and bracket securely. Check these periodically.• If a child swallows a battery, consult a doctor immediately.• Avoid having the computer in direct sunlight for unnecessary or extended periods.• Do not disassemble the computer.• Do not drop the computer. Doing so may result in a computer malfunction or damage.
When using the computer installed on the bracket, change the MODE by pressing on the three dots
below the screen. Pressing hard on other areas can result in malfunction or damage to the computer.• Never place the computer on a metal surface. If you do, the contact points will conductelectricity, discharging the battery.• Tighten the dial on the Flex-Tight bracket by hand only. Over-tightening can damage the bracketthreads.• When cleaning the computer, bracket and sensor, do not use thinners, benzene, or alcohol.• Dispose of used batteries according to local regulations.• LCD screen may be distorted when viewed through polarized sunglass lenses.How to install the unit on your bicycleInstall the speed sensor and wheel magnetInstall the sensor and magnet :Sensor line* When installing cadence sensor 4, insertthe sensor rubber pad 7 if necessary.MagnetSensorMagnetSensor
A
The magnet should passthrough the sensor line.
B
The clearance between the sensor surfaceand the magnet must not exceed 3 mm.1 Bracket band2 Bracket3 Speed sensor4 Cadence sensor5 Wheel magnet6 Cadence magnet
7
Sensor rubber pad8 Bracket rubber pad9 Nylon ties (x10)* After installation, check that the speed sensor and cadence sensor are functioning properly.In the case of the speed sensor, lift the rear wheel off the ground and spin the wheel tocheck the speed is displayed.
In the case of the cadence sensor, press MODE to display C (cadence) on the mode screen.
Rotate the crank in the non driving direction and check cadence is displayed.If the speed is not displayed, check that conditions
A
and
B
are satisfied.While supporting itby hand,push it out as if liftingthe front upRear wheel spokeToward the sensor lineRemove/install thecomputerInstall the cadence sensor and cadence magnetLeft crank (Inside)Toward the sensor lineCaution:Round off the cut edge of thebracket band to prevent injury.
Cut
Attach the bracket to the stem or handlebarCaution:Tighten the bracket, ensuring that thecable does not get caught in the stem.
Stem
HandlebarCaution:Tighten the bracket, ensuring that the cabledoes not get caught in the handlebar.Route the cableCaution:Turn the handlebar to makesure wire does not hinder fullrotation.When attaching the bracket to the handlebarWhen attaching the bracket to the stemUse the nylon tie 9 to securethe cable on the frame. Windthe cable on the rear brakecable as shown.Left Chain Stay (Inside)Left Chain Stay (Outside)Click
Cateye Strada RD200 Cadence

Имате ли въпрос относно Cateye Strada RD200 Cadence?

Брой въпроси: 0

Задайте въпроса, който имате за Cateye Strada RD200 Cadence тук направо на други собственици на продукта. Дайте ясно и изчерпателно описание на проблема и Вашия въпрос. Колкото по–добре опишете проблема си и зададете въпроса си, толкова по–лесно другите собственици на Cateye Strada RD200 Cadence ще могат да Ви дадат добър отговор.

Тук вижте безплотното ръководство за Cateye Strada RD200 Cadence. Прочетохте ли ръководството, но отговаря ли то на Вашия въпрос? Тогава задайте въпроса си на тази страница на други собственици на Cateye Strada RD200 Cadence. Задайте въпроса си тук

Спецификации на продукта

Общи
Марка Cateye
Модел Strada RD200 Cadence
Продукт Компютър за велосипед
EAN 4990173017317
Език Английски
Вид файл PDF

Често задавани въпроси

По-долу ще намерите най-често задаваните въпроси за Cateye Strada RD200 Cadence.

Не можете ли да откриете въпроса си? Задайте въпроса си тук