Oyen Digital CB3-54-1000-BK

Oyen Digital CB3-54-1000-BK ръководство на потребителя

  • MiniPro Hard Drive Series
    User Guide
    (3) Connecting the Hard Drive
    Connecting using USB:
    1) Connect the USB connector from the USB cable to a USB port on
    your computer. (If your drive includes a USB y-cable, we recommend
    connecting both USB connectors for maximum power. This is generally
    not necessary if connecting to a USB 3.0 integrated port.)
    2) Connect the other end of the USB cable to the hard drive.
    3) Turn the power switch on. Wait 5-20 seconds for the computer
    to recognize the drive.
    a) Front USB ports on a desktop may not be able to provide adequate power.
    b) If connecting to a USB Hub, make sure it is a powered hub (uses AC adapter).
    Connecting using FireWire:
    1) Connect the appropriate FireWire cable to a FireWire port on
    your computer.
    2) Connect the other end of the FireWire cable to the hard drive.
    3) Turn the power switch on. Wait 5-20 seconds for the computer
    to recognize the drive.
    Connecting using eSATA:
    1) Connect the eSATA cable to the eSATA port on your computer.
    2) Connect the other end of the cable to the hard drive.
    3) Connect power to the drive using one of the following options:
    • AC Power Adapter
    • DC to USB Power Cable
    • eSATAp Power Cable (not included)
    4) Turn the power switch on. Wait 5-20 seconds for the computer
    to recognize the drive.
    Note: The drive should only be connected to your computer via
    one interface at a time.
    The drive is pre-formatted as either NTFS (Win) or Mac OS
    Extended (Mac) depending on the software included.
    For users who wish to reformat the drive, please visit our
    website for instructions.
    To reformat using Windows:
    To reformat using MAC OS:
    Note: The drive can be used on both Windows and Mac
    systems by formatting the drive as “MS-DOS (FAT32).
    Instructions are provided in the Mac OS link above.
    (4) Formatting the Hard Drive (5) Using the Hard Drive (6) Disconnecting the Hard Drive
    (7) Warranty Information
    (9) FAQs
    (8) Safety Information
    Using the MiniPro with the included software
    The MiniPro includes software (via download) that allows you to
    easily backup your important les. The software is not required in
    order to use the drive. To install the software, simply follow the
    steps on the included glossy card.
    Using the MiniPro without software
    1) Look for the MiniPro drive in My Computer (Win) or Finder (Mac).
    2) Click and hold down the mouse button on the le/folder that you
    want to copy to the MiniPro drive.
    3) Drag the mouse over the icon representing the MiniPro drive.
    4) Let go of the mouse button and the le will copy to the MiniPro.
    5) The task is complete. This is known as a "drag-and-drop" action.
    Using the MiniPro with Apple Time Machine (Mac Users Only)
    1) Make sure the drive is formatted as Mac OS Extended (Journaled)
    as described in the “Formatting the Hard Drive section.
    2) Go to the Apple Menu > System Preferences and click on the
    Time Machine icon. The Time Machine panel will then launch.
    3) Click On to enable Time Machine.
    4) Select the MiniPro hard drive and choose “Use for Backup.
    5) You can set additional options by clicking the Options button.
    6) Time Machine is now backing up your Mac automatically to the
    MiniPro hard drive.
    The disk drive contained in your MiniPro is a delicate
    electronic device and is susceptible to damage due to
    excessive physical shock. Please handle the unit with care.
    Avoid moving the drive while it is reading/writing data.
    Doing so can cause corruption and/or damage to the drive.
    Q: Can I use my drive with bus power only?
    A: Yes, in the majority of cases bus power is adequate. However, if you
    are using the drive with a hub, make sure that it is a powered hub
    (uses AC adapter).
    Q: Why does my computer show that the external hard drive
    has less capacity than advertised?
    A: In the hard drive industry the partitioned size will be less than the
    printed capacity on the label. This is due to the fact that computers
    calculate capacity based on a binary (base 2) method, where
    1GB = 1024 MB. The hard drive industry calculates using a decimal
    method, where 1GB = 1000 MB. This is why the two dierent industries
    will report dierent capacities for the same drive.
    Q: How do I boot in MAC OS X using the external hard drive?
    A: Open Disk Utility, click the drive and select “Partition” in menu on
    the right. Choose “Mac OS Extended (Journaled). 2) Click “Options.
    If you have an Intel Mac, select “GUID” as the partition scheme. If you
    have a Power PC Mac, select Apple Partition Map. 3) Click “Partition” ;
    upon completion, install the Operating System on the external drive.
    5) Upon completion, eject the external drive and reboot the Mac as
    normal. 6) After reboot, connect the external drive to the computer.
    Open System Preferences and click “Startup Disk. Choose the external
    drive. Conrm and click restart.
    For other questions please contact tech support or visit the FAQ
    section of our Web site (www.oyendigital.com/support.html).
    Technical Support: tech@oyendigital.com
    This product includes a three (3) year repair/replacement
    warranty provided by Oyen Digital. This warranty is non-
    transferable and is limited to the original purchaser. Warranty
    service may be requested by completing the form at the
    following link: www.oyendigital.com/rma-request-form.html
    For our complete warranty policy, visit:
    Windows: Close all windows and applications that are accessing
    the drive. Click the green “Eject Hardware (Safely Remove
    Hardware) icon in the system tray and highlight the external drive.
    Wait for a few seconds until the system prompts You may safely
    remove this device.
    MAC: Close all windows and applications that are accessing the
    drive. Drag the external drive to the Trash/Eject icon to dismount it.
    After the disk icon has disappeared from the desktop, you may
    safely disconnect the external hard drive.
    4.9 x 3.1 x 1.0 inches

Имате ли въпрос относно Oyen Digital CB3-54-1000-BK?

manual_questions_numberofquestions 0

Задайте въпроса, който имате за Oyen Digital CB3-54-1000-BK тук направо на други собственици на продукта. Дайте ясно и изчерпателно описание на проблема и Вашия въпрос. Колкото по–добре опишете проблема си и зададете въпроса си, толкова по–лесно другите собственици на Oyen Digital CB3-54-1000-BK ще могат да Ви дадат добър отговор.

Тук вижте безплотното ръководство за Oyen Digital CB3-54-1000-BK. Прочетохте ли ръководството, но отговаря ли то на Вашия въпрос? Тогава задайте въпроса си на тази страница на други собственици на Oyen Digital CB3-54-1000-BK.

Спецификации на продукта

Марка Oyen Digital
Модел CB3-54-1000-BK
Продукт Външен твърд диск
EAN 852673002993
Език Английски
Вид файл PDF
Дисково устройство
Капацитет на твърдия диск 1000GB
Скорост на твърдия диск 7200об/мин
Размер на твърдия диск - 2011-05-04 11:27:54 2012-06-08 13:40:02 3166 16 22
Размер на буфера на устройството за съхранение 32MB
Други характеристики
Технология на свързване Жичен
Входни/Изходни портове 2x FireWire, 1x USB3.0, DC In
Свържи и играй
Поддържани Windows операционни системи Windows 7 Home Premium, Windows 8, Windows Vista Home Premium, Windows XP Home
Поддържани операционни системи на Mac Mac OS X 10.2 Jaguar, Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 S✗w Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Четец за пръстови отпечатаци
Защита с парола -
Цвят на продукта Черен
Материал на държача Алуминий
Ключ за вкл/изкл
Сертификати CE, FCC
Поддръжка на Linux
Портове и Интерфейси
USB версия 3.2 Gen 1 (3.1 Gen 1)
Максимална скорост на предаване на данни 5000Мбит/с
Скорости за пренос на данни през USB 5000Мбит/с
Интерфейс FireWire 800
USB конектор USB Тип-A
Интерфейс FireWire 400
Захранване на шината USB
Входящо напрежение на адаптера за променлив ток 100-240V
Адаптер за външно захранване
Честота на адптера за променлив ток 50 - 60Hz
Тегло и размери
Ширина 124.5мм
Дълбочина 79мм
Височина 25.4мм
Тегло 296г
Опаковка - данни
Включени кабели в комплекта FireWire, USB
Ръководство за потребителя
Условия на работа
Работна температура 5 - 40°C
Температура за съхранение -20 - 70°C
Диапазон на влажноста при експлоатация 10 - 80
Относителна влажност за съхранение 5 - 90

Купете свързани продукти:

    Свързани продукти

    Външен твърд диск Oyen Digital