Rega Fono Mini A2D ръководство на потребителя

Rega Fono Mini A2D
  • Брой стр.: 1
  • Вид файл: PDF
  • Exceptional Hi-Fi designed and manufactured in England

    Fono mini A2D

    Moving Magnet disc stage with USB
    Connections via USB to PC
    To transfer vinyl to your PC You will need to install
    a digital audio editor. Such software is widely
    available as a free download (such as Audacity)
    from the internet. This is a simple interface which
    allows monitoring of volume and balance whilst
    transferring your audio to your PC hard drive.
    Audio editing software includes a level meter
    which indicates the output level achieved when
    playing a piece of vinyl. You should adjust the
    output as necessary via the ‘Level’ control located
    on the front panel. Always take special note of
    record levels to ensure optimum recording quality.
    Output Level Dial
    Input sensitivity: 5mV for 500mV output
    Input loading: 47k +100pF
    Maximum input level: 70mV @ 1kHz
    Output Impedance: 100 Ohms
    Signal to noise ratio: 78dBA ref 5mV
    Power requirements: 24VAC 85mA
    Input for full scale digital output: 7.5mV
    Only use the supplied mains adaptors with this product.
    Input 230V-50Hz 25mA
    Output 24V-100mA
    Input 230V-30mA
    Output 24V-100mA
    Input 115V-60mA
    Output 24V-100mA
    Input 230V-50Hz 25mA
    Output 24V-100mA
    The Fono mini A2D is designed to amplify the
    signal from a moving magnet cartridge to a
    suitable level for all line level inputs of an audio
    amplifier. The USB interface also offers the ability
    to simply transfer vinyl to PC . The Fono mini A2D
    amplifier offers exceptional performance and
    convenience and will be a valuable addition to any
    Hi-Fi set up.
    Input Connections (1)
    Connect the signal lead (tonearm leads) to the
    input sockets labelled on the rear panel. If the
    tonearm requires a separate earth please
    connect the earth lead to the earth terminal
    located on the front panel of the Fono mini A2D.
    Output Connections (2)
    Connect the output sockets of the Fono mini A2D
    to a suitable ‘line level’ input on your amplifier
    using appropriate RCA leads. (Do not connect to
    an amplifiers integrated ‘Phono’ or ‘Disk’ input).
    Power Connections (4)
    Connect the designated power supply to the
    power socket situated on the rear panel. Power
    on is indicated by illumination of the red LED (3).
    Set-up is now complete, simply switch on, sit back
    and enjoy!
Rega Fono Mini A2D

Имате ли въпрос относно Rega Fono Mini A2D?

Брой въпроси: 0

Задайте въпроса, който имате за Rega Fono Mini A2D тук направо на други собственици на продукта. Дайте ясно и изчерпателно описание на проблема и Вашия въпрос. Колкото по–добре опишете проблема си и зададете въпроса си, толкова по–лесно другите собственици на Rega Fono Mini A2D ще могат да Ви дадат добър отговор.

Тук вижте безплотното ръководство за Rega Fono Mini A2D. Прочетохте ли ръководството, но отговаря ли то на Вашия въпрос? Тогава задайте въпроса си на тази страница на други собственици на Rega Fono Mini A2D. Задайте въпроса си тук

Спецификации на продукта

Марка Rega
Модел Fono Mini A2D
Продукт Ресивър
Език Английски
Вид файл PDF