Sony ICF-C1PJ ръководство на потребителя

Sony ICF-C1PJ
(2)
  • Брой стр.: 2
  • Вид файл: PDF
ICF-C1PJ_CED/CEK [GB/ES] 4-528-478-23(1)

Getting Started

Connecting the AM

loop antenna

The shape and the length of the antenna is
designed to receive AM signals. Do not
dismantle or roll up the antenna.
1 Raise the plastic stand and fit the
antenna into the slot of the stand.
Press the
antenna into
the stand
until it clicks.
Plastic stand
2 Insert the AM antenna connector into
the AM ANTENNA jack on the unit.
To remove the AM loop
antenna
Push and hold down the tab of the antenna
terminal clamp, and remove the AM loop
antenna.

Connecting to an AC

power source

Connect the AC power cord to a wall outlet.
To wall outlet
day and month” (about 2 seconds) “year”
(about 2 seconds) current CET (Central
European Time) or current WET (Western
European Time)” appears on the display in turn.
(This unit is preset to the current CET (except
for UK model) or the current WET (for UK
model) at the factory, and is powered by the
back-up battery.)

Setting the clock

All you need to do to set the clock for the first
time is select your time zone.
Except for UK model
The unit is set to the current CET (Central
European Time) as a default. If you live in
the Central European Time zone, you do
not need to perform this operation.
If you want to change the Automatic DST/
summer time adjustment settings, refer to
About Automatic DST/summer time
adjustment.
For UK model
The unit is set to the current WET (Western
European Time) as a default. If you live in
the Western European Time zone, you do
not need to perform this operation.
If you want to change the Automatic DST/
summer time adjustment settings, refer to
About Automatic DST/summer time
adjustment.
1 Press and hold TIME ZONE for more
than 2 seconds.
Area number “1:00” or “0:00” appears on
the display.
2 Press VOL/SET + or repeatedly to
select a number as follows:
Except for UK model
Area
number
Time zone
Automatic DST/
summer time
adjustment
“0:00” Western
European Time
(GMT±0:00)
Initial
setting: On
“1:00”
(default)
Central
European Time
(GMT+1:00)
“2:00” Eastern
European Time
(GMT+2:00)
For UK model
Area
number
Time zone
Automatic DST/
summer time
adjustment
“0:00”
(default)
Western
European Time
(GMT±0:00)
Initial
setting: On
“1:00” Central
European Time
(GMT+1:00)
“2:00” Eastern
European Time
(GMT+2:00)
“4:00” Gulf Standard
Time
(GMT+4:00)
Initial
setting: Off
“8:00” Hong Kong Time
(GMT+8:00)
3 Press SNOOZE/BRIGHTNESS/ENTER
to set.If you live in a country/region other than in these time zones
Refer to “Setting the clock manually” to set the
correct time.
Note
During shipment and your first use, a clock
error may occur. In this case, refer to “Setting
the clock manually” to set the correct time.
About Automatic DST/
summer time adjustment
This unit is equipped with a DST/summer time
adjustment function. When this function is
turned on, the unit automatically adjusts for
daylight saving time (summer time). “DST”
automatically appears on the display at the
beginning of daylight saving time (summer
time), and disappears at the end of daylight
saving time (summer time).
The Automatic DST/summer time adjustment
is based on GMT (Greenwich Mean Time).
Area number “0:00”:

Daylight saving time (summer time) begins
at 1:00 AM on the final Sunday of March.

Standard time begins at 2:00 AM on the final
Sunday of October.
Area number “1:00”:

Daylight saving time (summer time) begins
at 2:00 AM on the final Sunday of March.

Standard time begins at 3:00 AM on the final
Sunday of October.
Area number “2:00”:

Daylight saving time (summer time) begins
at 3:00 AM on the final Sunday of March.

Standard time begins at 4:00 AM on the final
Sunday of October.
Area number “4:00” (for UK model):

Daylight saving time (summer time) begins
at 2:00 AM on the final Sunday of March.

Standard time begins at 3:00 AM on the final
Sunday of October.
Area number “8:00” (for UK model):

Daylight saving time (summer time) begins
at 2:00 AM on the final Sunday of March.

Standard time begins at 3:00 AM on the final
Sunday of October.
Note

The implementation of DST/summer time
and its beginning/ending date and time are
subject to circumstances and laws in each
country/region. Should this interfere with the
desired adjustment, cancel the Automatic
DST/summer time adjustment and set the
clock manually as necessary. Customers
living in a country/region that does not use
daylight saving time (summer time) should
cancel the Automatic DST/summer time
adjustment before using the unit.
Switching the Automatic
DST/summer time
adjustment function on or off
You can turn the Automatic DST/summer
time adjustment function on or off.
Press and hold DST for more than 2 seconds.
The display will show Aut On”
(Automatic DST/summer time adjustment
is turned on) or Aut OFF” (Automatic
DST/summer time adjustment is turned
off).

Operations

Setting the clock

manually

To change the clock setting manually, operate
the unit as follows.
1 Press and hold SET TIME/DATE for
more than 2 seconds.
The year will start to flash on the display.
2 Press VOL/SET + or repeatedly to
select the year, and then press SNOOZE/BRIGHTNESS/ENTER.
3 Repeat step 2 to set the month, day
and time.
After setting the time, a beep will sound.
Notes
If you do not press any button for about 1
minute while setting the clock, clock setting
mode will be canceled.
A 100-year calendar (2013 - 2112) is installed
in the system.
To change the time format
You can choose between the 24-hour system
(default) or the 12-hour system to display the
time.
Press and hold ALARM RESET/OFF and SNOOZE/BRIGHTNESS/ENTER for about 3 seconds.
The time format toggles between the 24-hour
system (“0:00” = midnight) and the 12-hour
system (“AM 12:00” = midnight).
To display the date and year
Press SET TIME/DATE once to display the day
and month, and press again to display the year.
To return to the current time display, press SET
TIME/DATE once again; or after a few seconds
the clock display will return automatically.
When daylight saving time
(summer time) begins/ends
while Automatic DST/summer
time adjustment is set to off
Change the clock setting manually if you have
canceled the Automatic DST/summer time
adjustment.

Using the projector

The projector function allows you to display the
clock and the currently used alarm icons on a
nearby wall or ceiling at a range of 0.5 m – 4 m.
1 Rotate the projector unit to point the
projector lens in the desired direction.
2 Press PROJECTION.
3 Turn FOCUS to adjust the focus.
To turn off the projector, press PROJECTION
again.
To rotate the projection view
Press ROTATE PROJECTION repeatedly.
Each time you press ROTATE PROJECTION, the
projection view rotates as Fig. .
Notes

Do not stare into the lens directly.

The projector function cannot be used unless
the clock has been set.

Certain walls and ceilings may not display
the projection properly.

The projector unit can be rotated 90° forward
or backward from the upward position, and
clicks when returned to the upward position.

If the projector unit is rotated beyond its
limits, it may be damaged.

The projector will automatically turn off after
16 hours.

Listening to the radio

1 Press AM/FM/NATURE SOUND
repeatedly to select the desired band (AM or FM).
2 Press TUNING + or to tune to the
desired station.
If you press and hold TUNING + or ,
scanning starts. Scanning pauses when a
station is found, and restarts after a few
seconds. To stop scanning, press TUNING +
or (or SNOOZE/BRIGHTNESS/ENTER).
3 Press VOL/SET + or to adjust the
volume.
To turn off the radio, press ALARM RESET/
OFF.
Note

The FM frequency display is accurate to
within 0.1MHz. For example, frequencies
88.00MHz and 88.05MHz will both be
displayed as “88.0MHz.
To preset radio stations
You can preset 5 stations for FM and 5 stations
for AM.
1 Tune to the station you wish to preset.
2 Press and hold the desired NATURE
SOUND/PRESET (1 to 5) until you hear a beep.
Example: The following display appears
when you preset FM 105.7 MHz to preset
number 3 for FM.
The display shows the frequency for a few
seconds and then changes back to the
current time.
To change the preset station, tune to the
desired station and press and hold the
NATURE SOUND/PRESET (1 to 5) until you
hear a beep.
Note

If you try to store another station with the
same preset number, the previously stored
station will be replaced.
To tune to a preset station
1 Press AM/FM/NATURE SOUND
repeatedly to select the desired band (AM or FM).
2 Press NATURE SOUND/PRESET (1 to 5)
where the desired station is stored.
3 Press VOL/SET + or to adjust the
volume.
Note

If no station has been preset yet, “Non”
appears on the display. Then the unit returns
to the same state as in step 1.
English
Before operating the unit, please read this
guide thoroughly and retain it for future
reference.
For customers in Europe
Register now for free updates at :
www.sony-europe.com/myproducts
WARNING
Do not ingest the battery,
Chemical Burn Hazard.
This product contains a coin/button cell
battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns in
just 2 hours and can lead to death.
Keep new and used batteries away from
children.
If the battery compartment does not close
securely, stop using the product and keep it
away from children.
If you think batteries might have been
swallowed or placed inside any part of the
body, seek immediate medical attention.
Hereby, Sony Corporation declares that this
equipment is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity
is available at the following internet address:
http://www.compliance.sony.de/
Do not expose batteries or apparatus with
battery-installed to excessive heat such as
sunshine, fire or the like.
The nameplate and important information
concerning safety are located on the bottom
exterior.
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same type.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives.
This product has been manufactured by or on
behalf of Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075 Japan. Inquiries
related to product compliance based on
European Union legislation shall be addressed
to the authorized representative, Sony Belgium,
bijkantoor van Sony Europe Limited, Da
Vincilaan 7-D1, 1935 Zaventem, Belgium. For
any service or guarantee matters, please refer
to the addresses provided in the separate
service or guarantee documents.
The validity of the CE marking is restricted to
only those countries where it is legally
enforced, mainly in the countries EEA
(European Economic Area).
Disposal of waste batteries and electrical and electronic equipment (applicable in the European Union and other European countries with separate collection systems)
This symbol on the product, the
battery or on the packaging
indicates that the product and the
battery shall not be treated as
household waste. On certain
batteries this symbol might be
used in combination with a chemical symbol.
The chemical symbols for mercury (Hg) or lead
(Pb) are added if the battery contains more
than 0.0005% mercury or 0.004% lead. By
ensuring these products and batteries are
disposed of correctly, you will help prevent
potentially negative consequences for the
environment and human health which could
otherwise be caused by inappropriate waste
handling. The recycling of the materials will
help to conserve natural resources.
In case of products that for safety, performance
or data integrity reasons require a permanent
connection with an incorporated battery, this
battery should be replaced by qualified service
staff only. To ensure that the battery and the
electrical and electronic equipment will be
treated properly, hand over these products at
end-of-life to the applicable collection point for
the recycling of electrical and electronic
equipment. For all other batteries, please view
the section on how to remove the battery from
the product safely. Hand the battery over to the
applicable collection point for the recycling of
waste batteries. For more detailed information
about recycling of this product or battery,
please contact your local Civic Office, your
household waste disposal service or the shop
where you purchased the product or battery.
WARNING

Battery may explode if handled incorrectly.
Do not recharge, disassemble or dispose of
in fire.

Dispose of used battery promptly and in
accordance with local environmental laws
and guidelines. Keep away from children.
License and Trademark
Notice
No Power No Problem™ is a trademark of Sony
Corporation.
Precautions

Operate the unit on the power sources
specified in “Specifications.

To disconnect the power cord (mains lead),
pull it out by the plug, not the cord.

Do not leave the unit in a location near a
heat source, such as a radiator or airduct, or
in a place subject to direct sunlight, excessive
dust, mechanical vibration, or shock.

Allow adequate air circulation to prevent
internal heat build-up. Do not place the unit
on a surface (a rug, blanket, etc.) or near
materials (a curtain) that might block the
ventilation holes.

Should any solid object or liquid fall into the
unit, unplug the unit and have it checked by
a qualified personnel before operating it any
further.

To clean the casing, use a soft dry cloth. Do
not use any type of solvent, such as alcohol
or benzine, which may damage the finish.
NOTES ON LITHIUM BATTERY

Dispose of used battery promptly. Keep the
lithium battery out of the reach of children.
Should the battery be swallowed,
immediately consult a doctor.

Wipe the battery with a dry cloth to assure a
good contact.

Be sure to observe the correct polarity when
installing the battery.

Do not hold the battery with metallic
tweezers, otherwise a short-circuit may
occur.

Do not expose the battery to excessive heat
such as direct sunlight, fire or the like.
If you have any questions or problems
concerning your unit, please consult your
nearest Sony dealer.

Selecting a Nature

Sound

This unit includes 5 types of Nature Sounds:
Sea Waves, Birds, Rain, Brook, and Under the
Sea.
1 Press AM/FM/NATURE SOUND
repeatedly to select the Nature Sound.
2 Press the desired NATURE SOUND/
PRESET (1 to 5).
Icons Sound type
Sea Waves
Birds
Rain
Brook
Under the Sea
To turn off the Nature Sound, press ALARM
RESET/OFF.
Note

When other functions are in use, Nature
Sounds are not available.

Setting the alarm

The dual alarm function allows you to set two
alarm programs (ALARM A and ALARM B).
The alarm time can be set for each program
and the alarm sound can be selected from
“RADIO” (radio), “BUZZ” (buzzer), or “NATURE”
(Nature Sound).
Before setting the alarm

Make sure to set the clock. (See “Setting the
clock manually.”)

To set the radio alarm, first preset your
favorite station. (See “To preset radio
stations.”)
1 Press and hold SET ALARM/ALARM A
(or B) for more than 2 seconds.
While setting the alarm, A” (or “B”) flashes
on the display.
2 Press VOL/SET + or to select the
desired hour, and press SNOOZE/BRIGHTNESS/ENTER.
3 Press VOL/SET + or to select the
desired minute, and press SNOOZE/BRIGHTNESS/ENTER.
4 Press VOL/SET + or to select the
desired alarm period (“WEEKDAY,” “WEEKEND,” or every day*), and press SNOOZE/BRIGHTNESS/ENTER.* In the case of every day, both “WEEKDAY” and “WEEKEND” are displayed.
5 Press VOL/SET + or to select the
desired alarm mode (“RADIO,” “BUZZ,” or “NATURE”), and press SNOOZE/BRIGHTNESS/ENTER.
When selecting “RADIO”
Proceed to “ Setting the radio alarm.
When selecting “BUZZ”
The setting is complete. The buzzer will
sound at the set time, gradually increasing
in volume. (“A” (or “B”) flashes on the
display.)
When selecting “NATURE”
Proceed to “ Setting the Nature Sound
alarm.
Setting the radio alarm
6 Press VOL/SET + or to select the AM
band or FM band, and press SNOOZE/BRIGHTNESS/ENTER.
7 Press VOL/SET + or (or NATURE
SOUND/PRESET (1 to 5)) to select the preset number of desired station, and press SNOOZE/BRIGHTNESS/ENTER.
If no station has been preset yet
The preset number and “Non” appear on
the display alternately. In this case, the
buzzer will sound at the set time.
8 Press VOL/SET + or to adjust the
volume, and press SNOOZE/BRIGHTNESS/ENTER.
The setting is complete. The radio will turn
on at the set time, gradually increasing in
volume. (“A” (or “B”) flashes on the display.)
Setting the Nature Sound alarm
6 Press VOL/SET + or (or NATURE
SOUND/PRESET (1 to 5)) to select the desired Nature Sound, and press SNOOZE/BRIGHTNESS/ENTER.
7 Press VOL/SET + or to adjust the
volume, and press SNOOZE/BRIGHTNESS/ENTER.
The setting is complete. The Nature Sound
will sound at the set time, gradually
increasing in volume. (“A” (or “B”) flashes on
the display.)
To stop the alarm
Press ALARM RESET/OFF to turn off the alarm.
The alarm will sound again at the same time
the next weekday or the next weekend.
To doze for a few more minutes
Press SNOOZE/BRIGHTNESS/ENTER.
The sound turns off, but will automatically
come on again after about 10 minutes.
Each time you press SNOOZE/BRIGHTNESS/
ENTER, the snooze time changes as follows:
The display shows the snooze time for a few
seconds and returns to show the current time.
(“A (or “B”) flashes on the display.)
To deactivate the alarm
Press SET ALARM/ALARM A (or B).
A (or “B”) disappears from the display.
To change an alarm setting
Set the alarm again.
Tips

When the alarm setting is complete, the
alarm time setting is displayed.

If you press and hold SNOOZE/BRIGHTNESS/
ENTER for more than 2 seconds while setting
the alarm, the alarm setting is immediately
complete.
Notes

If a second alarm sounds during a first (or
the snooze function is active), the second
alarm takes priority.

If the same alarm time is set for both ALARM
A and ALARM B, ALARM A takes priority.

If no operation is performed while the alarm
is sounding, the alarm will stop after about
60 minutes.

When Automatic DST/summer time
adjustment is set, the alarm sounds as
follows:
– If the alarm is set to a time that is
skipped as a result of daylight saving
time starting, the alarm will sound when
daylight saving time is applied.
– If the alarm is set to a time that is
doubled as a result of daylight saving
time ending, the alarm will sound twice.
Notes on the alarm in the event of a power interruption
In the event of a power interruption, the alarm
functions work until the battery is fully
discharged. But certain functions may be
affected as follows:

The display will disappear.

If the alarm sound is set to “RADIO” or
“NATURE,” the buzzer will sound.

If a power interruption occurs while the
alarm is sounding, the buzzer will sound.

If ALARM RESET/OFF is not pressed, the
alarm will sound for about 5 minutes.

If “
appears on the display, the alarm will
not sound in the event of a power
interruption. Replace the battery if
appears.

The snooze function will not work.

During a power interruption, the alarm will
sound only once at the set time.

Setting the sleep

timer

You can fall asleep to the radio or Nature
Sound using the sleep timer, which turns off
the radio or Nature Sound automatically after a
preset duration.
Press SLEEP while the radio or Nature Sound is playing.
“SLEEP” appears on the display.
Each time you press SLEEP, the duration (in
minutes) changes on the display as follows:
The radio or Nature Sound will play for the
duration you set, then shut off.
To deactivate the sleep timer, press SLEEP
repeatedly to set the sleep timer to “OFF.
To turn off the radio or Nature
Sound before the preset time
Press ALARM RESET/OFF.
To use both the sleep timer and
alarm
You can fall asleep to the radio or Nature
Sound and also be awakened by the alarm at
the preset time.
Set the alarm, then set the sleep timer.
Tip

When you press SLEEP while the sleep timer
is activated, the remaining time appears on
the display.
Note

When the alarm is set to sound during the
sleep timer duration, the sleep timer will be
deactivated automatically when the alarm
sounds.

Setting the brightness

of the display

Three levels of brightness are available.
Press SNOOZE/BRIGHTNESS/ENTER.
Each time you press SNOOZE/BRIGHTNESS/
ENTER, the brightness of the display changes
as follows:
Tip

You can also set the brightness of the display
to off by pressing and holding SNOOZE/
BRIGHTNESS/ENTER.
Notes

When the alarm is sounding or the snooze
function is active, the brightness of the
display cannot be changed.

Even if the brightness is set to off, the display
lights at a low brightness level when the
alarm sounds.

Charging a

smartphone

You can charge a smartphone by connecting it
to the unit using a USB cable (not supplied).
Smartphone
USB cable supplied
with the smartphone
Notes

There is no guarantee that this unit can be
used to charge all products that can be
charged via USB.

This unit does not support power feeds
greater than 5 V/1.5 A.

Check the charge status on the smartphone.

If a warning tone sounds, remove the
smartphone from the unit.

The reception sensitivity on the radio may
worsen when charging a smartphone via
USB.

General information

About the battery as a

backup power source

This unit contains a CR2032 battery as a backup
power source to keep the clock and the alarm
operating during a power interruption. (No
Power No Problem system)
When to replace the
battery
When the battery is discharged, ” appears
on the display.
If a power interruption occurs while the battery
is discharged, the current time and alarm will
be erased.
Note for customers in Europe

The clock is preset at the factory, and its
memory is powered by the preinstalled Sony
CR2032 battery. If the “0:00” flashes on the
display when the unit is connected to AC
outlet for the first time, the battery may be
discharged. In this case, consult a Sony
dealer. The preinstalled CR2032 battery is
considered part of the product, and is
covered by the warranty. You are required to
show “Note for customers in Europe” (in this
instruction) to a Sony dealer in order to
validate the warranty for this product.
Replacing the backup
battery
1 Keep the AC plug connected to the
wall outlet, then open the battery compartment on the bottom of the unit.
Fully loosen
the screw.
Push the tab
and pull up the lid.
2 Remove the old battery by sliding it
out and picking it up.
3 Insert a new battery into the battery
compartment with the side facing
up.
CR2032
4 Replace the battery compartment lid
and tighten the screw.
5 Press AM/FM/NATURE SOUND to
remove “
” from the display.Notes

When you replace the battery, do not
disconnect the AC plug from the wall outlet.
Otherwise, the current date and time, alarm,
and station presets will be erased.

If the clock is erased while you are replacing
the battery, set the clock again. (See “Setting
the clock manually.”)

If the unit will be left unplugged for a long
time, remove the battery to avoid any
damage that may be caused by leakage or
corrosion.

Troubleshooting

Should any problems persist after you have
made the following checks, consult your
nearest Sony dealer.
The clock flashes “0:00” or “AM 12:00” after a power interruption.

The battery is discharged. Remove the old
battery and insert a new one.
Unsatisfactory reception

Extend the FM wire antenna fully to increase
reception sensitivity.

Connect the supplied AM loop antenna to
the unit. Rotate the antenna horizontally for
optimum reception.

Do not place the AM loop antenna near the
unit or other AV equipment, as noise may
result.

Keep digital music players or mobile phones
away from the AM loop antenna or the FM
antenna, as this may lead to reception
interference.
The alarm does not sound at the preset alarm time.

Check that A” or “B” appears on the display.
The radio or Nature Sound alarm is activated but no sound is emitted at the preset alarm time.

Check the alarm volume setting.
When daylight saving time (summer time) begins, the clock does not switch to daylight saving time (summer time) automatically.

Make sure the clock is set correctly.

When “Aut On” appears on the display
after pressing and holding DST for more than
2 seconds, the Automatic DST/summer time
function becomes active.

Specifications

Time display
Switch between the 24-hour system (default)
and the 12-hour system.
Frequency range
Band Frequency Channel step
FM 87.5 MHz – 108 MHz 0.05MHz
AM 531 kHz – 1,602 kHz 9kHz
Intermediate frequency
FM: 128 kHz
AM: 45 kHz
Speaker
Approx. 4.0 cm dia., 8 Ω
Power output: 700 mW (at 10% harmonic
distortion)
Power requirements
230 V AC, 50 Hz
For clock back up: 3 V DC, one CR2032 battery
USB power output
USB port (DC OUT 5 V 1.5 A)
Nature Sounds
Sea Waves, Birds, Rain, Brook, Under the Sea
Dimensions
Approx. 114.5 mm 104 mm 100.5 mm
(w/h/d) including projecting parts and controls
Mass
Approx. 625 g including CR2032 battery
Supplied accessories
AM loop antenna (1)
Design and specifications are subject to
change without notice.
DisplayProjector unitProjector lensNATURE SOUND/PRESETAC power cordFM wire antenna
Use the tactile dots on VOL/SET + and TUNING + and the tactile characters on 3
(NATURE SOUND/PRESET) and ALARM RESET/OFF as a guide when operating the
unit.

FM/AM Clock Radio

Operating InstructionsManual de instrucciones (En el reverso)©2014 Sony Corporation Printed in China4-528-478-23(1)ICF-C1PJ
Sony ICF-C1PJ

Имате ли въпрос относно Sony ICF-C1PJ?

Брой въпроси: 0

Задайте въпроса, който имате за Sony ICF-C1PJ тук направо на други собственици на продукта. Дайте ясно и изчерпателно описание на проблема и Вашия въпрос. Колкото по–добре опишете проблема си и зададете въпроса си, толкова по–лесно другите собственици на Sony ICF-C1PJ ще могат да Ви дадат добър отговор.

Тук вижте безплотното ръководство за Sony ICF-C1PJ. Прочетохте ли ръководството, но отговаря ли то на Вашия въпрос? Тогава задайте въпроса си на тази страница на други собственици на Sony ICF-C1PJ. Задайте въпроса си тук

Спецификации на продукта

Няма нужда да купувате външни високоговорители, за да получите чудесен звук. Благодарение на вградените високоговорители...
Общи
Марка Sony
Модел ICF-C1PJ
Продукт Радиочасовник
Език Английски
Вид файл PDF
Характеристики
Цвят на продукта Сребърен
AM антена
УКВ (FM) антена
Стенен/настолен часовник
Функция Snooze
Будилник
Зумер
Други характеристики
Показване на дата
Цифров тунер
Диаметър на преобразувателя 4 мм
FM радио
Дисплей LCD
Тонколони
Вграден високоговорител/и
Радио
Диапазон на FМ радио вълни 87.5 - 108 MHz
Тип радио Часовник
Тип тунер Цифров
Тегло и размери
Ширина 101 мм
Височина 102 мм
Дълбочина 101 мм
Тегло 490 г
Батерия/акумулатор
Тип батерия CR2032
Волтаж на батерията 3 V
Мощност
AC входна честота 60 Hz
Покажи повече

Често задавани въпроси

По-долу ще намерите най-често задаваните въпроси за Sony ICF-C1PJ.

Не можете ли да откриете въпроса си? Задайте въпроса си тук