Sony SRS-BTX300

Sony SRS-BTX300 ръководство на потребителя

  • Personal Audio System
    ©2013 Sony Corporation Printed in China
    4-449-951-32(1)
    SRS-BTX300
    What is Bluetooth
    Wireless Technology?
    Bluetooth wireless technology is a short-range wireless
    technology that enables wireless data communication
    between digital devices, such as a computer and digital
    camera. Bluetooth wireless technology operates within a range
    of about 10 m.
    Connecting two devices as necessary is common, but some
    devices can be connected to multiple devices at the same
    time.
    You do not need to use a cable for connection, nor is it
    necessary for the devices to face one another, such is the case
    with infrared technology. For example, you can use such a
    device in a bag or pocket.
    Bluetooth standard is an international standard supported by
    thousands of companies all over the world, and employed by
    various companies worldwide.
    Communication system and
    compatible Bluetooth profiles of the
    system
    Profile is standardisation of the function for each Bluetooth
    device specification. The system supports the following
    Bluetooth version and profiles:
    Communication System:
    Bluetooth Specification version 3.0
    Compatible Bluetooth Profiles:
    A2DP (Advanced Audio Distribution Profile): Transmitting
    or receiving audio content of high-quality.
    AVRCP (Audio Video Remote Control Profile): Controlling
    the volume.
    HSP (Headset Profile): Talking on the phone/Operating the
    phone.
    HFP (Hands-free Profile): Talking on the phone/Operating
    the phone by hands-free.
    Maximum communication range
    Use Bluetooth devices within 10 m (line of sight) of the system.
    Maximum communication range may shorten under the
    following conditions.
    There is an obstacle such as a person, metal, or wall
    between the system and Bluetooth device.
    A wireless LAN device is in use near the system.
    A microwave oven is in use near the system.
    A device that generates electromagnetic radiation is in
    use near the system.
    Interference from other devices
    Because Bluetooth devices and wireless LAN (IEEE802.11b/g)
    use the same frequency, microwave interference may occur
    and resulting in communication speed deterioration, noise, or
    invalid connection if the system is used near a wireless LAN
    device. In such a case, perform the following.
    Use the system at least 10 m away from the wireless LAN
    device.
    If the system is used within 10 m of a wireless LAN device,
    turn off the wireless LAN device.
    Interference to other devices
    Microwaves emitting from a Bluetooth device may affect the
    operation of electronic medical devices. Turn off the system
    and other Bluetooth devices in the following locations, as it
    may cause an accident.
    where inflammable gas is present, in a hospital, train,
    airplane, or a gas station
    near automatic doors or a fire alarm
    Notes
    To be able to use the Bluetooth function, the Bluetooth
    device to be connected requires the same profile as the
    systems.
    Note also that even if the same profile exists, devices may
    vary in function depending on their specifications.
    Due to the characteristic of Bluetooth wireless technology,
    the sound played on the system is slightly delayed from the
    sound played on the Bluetooth device during talking on the
    telephone or listening to the music.
    This system supports security capabilities that comply with
    the Bluetooth standard to provide a secure connection
    when the Bluetooth wireless technology is used, but
    security may not be enough depending on the setting. Be
    careful when communicating using Bluetooth wireless
    technology.
    We do not take any responsibility for the leakage of
    information during Bluetooth communication.
    A device featuring the Bluetooth function is required to
    conform to the Bluetooth standard specified by Bluetooth
    SIG, and be authenticated. Even if the connected device
    conforms to the above mentioned Bluetooth standard,
    some devices may not be connected or work correctly,
    depending on the features or specifications of the device.
    Noise or sound skips may occur depending on the Bluetooth
    device connected with the system, the communication
    environment or the usage environment.
    Operating Instructions
    English Personal Audio System
    Before operating the system, please read this guide
    thoroughly and retain it for future reference.
    WARNING
    To reduce the risk of fire or electric shock, do not
    expose this apparatus to rain or moisture.
    To reduce the risk of fire, do not cover the ventilation of the
    apparatus with newspapers, tablecloths, curtains, etc. And do
    not place lighted candles on the apparatus.
    To reduce the risk of fire or electric shock, do not expose this
    apparatus to dripping or splashing, and do not place objects
    filled with liquids, such as vases, on the apparatus.
    Do not install the appliance in a confined space, such as a
    bookcase or built-in cabinet.
    Do not expose the batteries (battery pack or batteries
    installed) to excessive heat such as sunshine, fire or the like for
    a long time.
    As the main plug of AC adaptor is used to disconnect the AC
    adaptor from the mains, connect it to an easily accessible AC
    outlet. Should you notice an abnormality in it, disconnect it
    from the AC outlet immediately.
    The unit is not disconnected from the AC power source
    (mains) as long as it is connected to the wall outlet, even if the
    unit itself has been turned off.
    The nameplate and important information concerning safety
    are located on the bottom exterior of the main unit and on the
    surface of the AC adaptor.
    On Copyrights and Licenses
    The Bluetooth® word mark and logos are owned by the
    Bluetooth SIG, Inc. and any use of such marks by Sony
    Corporation is under license.
    The N Mark is a trademark or registered trademark of NFC
    Forum, Inc. in the United States and in other countries.
    Android is a trademark of Google Inc.
    iPhone is a trademark of Apple Inc., registered in the U.S. and
    other countries.
    Other trademarks and trade names are those of their
    respective owners.
    Precautions
    Notes when using with a mobile phone
    For details on operation of your mobile phone when
    receiving a telephone call while transmitting the sound
    using the Bluetooth connection, refer to the operating
    instructions supplied with the mobile phone.
    On safety
    Notes on the AC adaptor
    When connecting or disconnecting the AC adaptor, turn off
    the system beforehand. Otherwise, it may cause
    malfunction.
    Use only the supplied AC adaptor. To avoid damaging the
    system, do not use any other AC adaptor.
    Polarity of the plug
    Plug the AC adaptor into a nearby wall outlet (mains). In the
    case of a problem, unplug it from the wall outlet (mains)
    immediately.
    Do not install the AC adaptor in a confined space, such as a
    bookcase or built-in cabinet.
    To reduce the risk of fire or electric shock, do not expose the
    AC adaptor to dripping or splashing, and do not place
    objects filled with liquids, such as vases, on the AC adaptor.
    On placement
    Do not set the speaker in an inclined position.
    Do not leave the system in a location near heat sources, or
    in a place subject to direct sunlight, excessive dust,
    moisture, rain or mechanical shock.
    On operation
    Do not insert any small objects, etc., into the jacks or
    ventilation hole on the rear of the system. The system may
    short out or malfunction.
    On cleaning
    Do not use alcohol, benzine, or thinner to clean the cabinet.
    Others
    If you have any questions or problems concerning this
    system that are not covered in this manual, please consult
    your nearest Sony dealer.
    Function of Parts
    BATTERY/CHARGE indicator
    Lights up, flashes or turns off depending on the status of
    the system.
    For details, see the following section, “Indications of BATTERY/
    CHARGE indicator.
    N-mark
    Touch to make Bluetooth connection with an NFC
    compatible smartphone.
    (call) button
    Press to call or operate during a call.
    VOLUME −/+ buttons
    Adjusts the volume.
    LOCK RELEASE switch
    Use for opening and closing the side stand.
    Side stand
    Open to use the system.
    Illumination lamp
    Lights up in a variety of colors depending on the status of
    the system. For details, see the following section,
    “Indications of Illumination lamp.
    Microphone
    Use during a call.
    DC IN 12.5V jack
    Connects the supplied AC adaptor.
    AUDIO IN jack
    Connects to the headphone jack of a portable audio device,
    computer, etc., using a connecting cord (not supplied).
    BLUETOOTH STANDBY switch
    Turns on and off the Bluetooth standby mode.
    RESET button
    Resets the system.
    DC OUT ONLY connector (USB)
    Charges devices, such as your smartphone, etc. by
    connecting to the DC OUT ONLY connector (USB connector).
    SOUND button
    Press to select a sound effect.
    SOUND indicator
    Lights up, according to the sound effect setting.
    AUDIO IN button
    Press to listen to sound from a device connected by a
    connecting cord (not supplied).
    AUDIO IN indicator (amber)
    Lights up in AUDIO IN mode.
    BLUETOOTH-PAIRING button
    Press to pair with a Bluetooth device.
    Bluetooth indicator (blue)
    Lights up, flashes or turns off depending on the
    communication status.
    For details, see the following section, “Indications of the
    Bluetooth function.
    / button
    Turns the system on/off.
    Indications of BATTERY/CHARGE
    indicator (built-in lithium-ion battery)
    Status BATTERY/CHARGE indicator
    System turned on Lights up (green) (battery
    operation only)
    Battery requires charging
    Flashes (green)
    Charging battery
    Lights up (amber)
    Charging complete
    Off
    Indications of Illumination lamp
    Status Illumination lamp
    AUDIO IN mode Lights up (white)
    Searching for a device
    Lights up (white)
    Connecting to Bluetooth
    device
    Lights up (blue)
    Pressing VOLUME−/+
    buttons
    Flashes once (white)
    When the volume hits the
    maximum or minimum
    Flashes three times (white)
    Tip
    To turn the illumination on/off, hold down the
    BLUETOOTH-PAIRING button, then press and hold the /
    button.
    Indications of the Bluetooth function
    Status Bluetooth indicator (blue)
    Pairing with a device Flashes quickly
    Searching for a device Flashes
    Connected to a device Lights up
    Bluetooth standby mode
    Flashes slowly
    Opening the Side Stand
    Open the side stand and operate the buttons inside. The side
    stand also functions as a support while using the system.
    Slide the LOCK RELEASE switch in the direction of the arrow
    (illustration) to open the side stand.
    To close the side stand
    Close the side stand when you carry the system.
    Slide the LOCK RELEASE switch in the direction shown by the
    arrow above, then close the side stand by hand.
    The system automatically turns off when the side stand is
    closed.
    Turning the System on
    and off/Charging the
    system
    This system can operate by AC adaptor or built-in lithium-ion
    battery (rechargeable). Charge the battery before using the
    system for the first time.
    1 Connect the supplied AC adaptor.
    The BATTERY/CHARGE indicator (amber) lights up when
    the battery is being charged, and turns off when charging
    is complete. It takes approximately 4 hours to charge the
    battery.
    2 Press the / button.
    Tip
    You can operate the system by battery instead of the AC adaptor
    by charging the system before use.
    Notes
    When the BATTERY/CHARGE indicator flashes as below,
    charge the system. In these cases, you cannot charge
    devices via the DC OUT ONLY connector.
    Flashes (green) (Battery power is low).
    Flashes (amber), then turns off after turning on the system
    (No battery power remaining).
    When you switch the power source between AC adaptor
    and battery by connecting/disconnecting the AC adaptor,
    the system stops sound output for a short while. This is not
    a malfunction.
    The maximum power output will be lower when the AC
    adaptor is disconnected.
    DC IN12.5V
    jack
    AUDIO IN jack
    BLUETOOTH
    STANDBY switch
    RESET
    button
    DC OUT ONLY
    connector (USB)
    In an extremely cold or hot environment, note the following
    points.
    When operating by the AC adaptor, charging may complete
    too quickly, or may not be possible.
    When operating on battery only, the system may stop after
    the BATTERY/CHARGE indicator flashes (green) three times.
    Charge the battery at least twice a year.
    Repeated recharging causes the capacity of the battery to
    decrease over time. When the battery life drops to half the
    usual time, even after a full charge, contact your nearest
    Sony dealer to replace the battery.
    To reset the system
    Press the RESET button on the rear of the system with a
    pointed object if the buttons on the system do not function.
    How to Make Wireless
    Connection with
    Bluetooth Devices
    You can enjoy music and hands-free calling with the system
    wirelessly by using your devices Bluetooth function.
    Choose one of the following three connection methods, best
    suited for the Bluetooth device. For details on how to operate
    your device, refer to the operating instructions supplied with
    the device.
    Pairing with a Bluetooth device:
    see
    Pattern A
    Bluetooth devices need to be “paired” with each other
    beforehand.
    Connecting with a paired device:
    see
    Pattern B
    To listen to music with a Bluetooth device that has been
    paired, see this pattern.
    One touch connection with a smartphone (NFC):
    see
    Pattern C
    Using an NFC compatible smartphone, you can establish a
    Bluetooth connection by just touching the system with it.
    Check the following before operating the system.
    Both the system and the device are placed within 1 m of
    each other.
    The system is connected to the AC adaptor, or the battery is
    sufficiently charged.
    The operating instructions supplied with the device are at
    hand.
    Pattern A
    Pairing and connecting with a
    Bluetooth device
    1 Turn on the system.
    The Bluetooth indicator (blue) flashes.
    If the AUDIO IN indicator (amber) lights up, press the
    BLUETOOTH-PAIRING button.
    2 Set the Bluetooth function of the Bluetooth
    device to on.
    For details, refer to the operating instructions supplied
    with the device.
    3 Press and hold the BLUETOOTH-PAIRING
    button on the system until two beeps are
    heard.
    The Bluetooth indicator (blue) begins to flash quickly and
    pairing mode is entered.
    Tip
    When the system is turned on first time, the
    Bluetooth
    indicator (blue) starts flashing quickly.
    Flashes quickly
    4 Perform the pairing procedure on the
    Bluetooth device to detect the system.
    5 Select “SRS-BTX300” shown in the display of
    the Bluetooth device.
    If “SRS- BTX300” does not appear on the device’s display,
    repeat from step 2.
    Note
    Some devices cannot display a list of detected devices.
    6 If Passcode* input is required on the display
    of the Bluetooth device, input “0000.
    The Bluetooth connection is established and the Bluetooth
    indicator (blue) on the system stays on.
    * Passcode may be called “Passkey, “PIN code, “PIN
    number, or “Password.
    Tip
    To pair with other
    Bluetooth devices, repeat steps 2 to 6 for each
    device.
    Notes
    Pairing mode of the system is cancelled after about 5 minutes,
    and the Bluetooth indicator (blue) flashes. If the pairing mode is
    cancelled while performing this procedure, start over from step
    3.
    Passcode of the system is fixed as “0000. The system cannot be
    paired with a Bluetooth device whose Passcode is not “0000.
    Once
    Bluetooth devices are paired, there is no need to pair those
    devices again. However, in the following case, you will need to
    perform the pairing procedure again.
    The system is paired with 9 or more devices.
    The system can be paired with up to 8 Bluetooth devices. If a
    new device is paired after 8 devices have been paired, the
    device whose latest connection time is the oldest among the
    8 paired devices is replaced by the new one.
    More than one device can be paired with the system, but sound
    will be heard from just one of those devices.
    N-mark
    BATTERY/CHARGE
    indicator
    VOLUME −/+
    buttons
    (call) button
    LOCK RELEASE
    switch
    SOUND button/
    indicator
    AUDIO IN button/
    indicator
    BLUETOOTH -PAIRING
    button
    Bluetooth indicator
    / button
    Illumination lamp
    Microphone
    Side stand
    Pattern B
    Connecting with a paired
    Bluetooth device
    1 Turn on the system.
    The Bluetooth indicator (blue) flashes.
    If the AUDIO IN indicator (amber) lights up, press the
    BLUETOOTH-PAIRING button.
    2 Set the Bluetooth function of the Bluetooth
    device to on.
    Tip
    In the case of the last-connected
    Bluetooth device, the
    system tries to re-establish Bluetooth connection with it if
    the device’s Bluetooth function is on. When Bluetooth
    connection is established, the Bluetooth indicator (blue) on
    the system stays on.
    3 Select “SRS-BTX300” shown in the display of
    the Bluetooth device.
    If necessary, select a Bluetooth profile that the system
    supports from the following: A2DP, HSP or HFP. For details
    on each profile, see What is Bluetooth Wireless Technology?”
    The Bluetooth connection is established and the Bluetooth
    indicator (blue) on the system stays on.
    Notes
    This step may not be necessary for some devices.
    If the system cannot connect to the
    Bluetooth device, delete
    “SRS-BTX300” from the Bluetooth device, then perform
    pairing again.
    Bluetooth standby mode
    When the Bluetooth standby mode is set to ON, the system can
    be turned on and operated by a Bluetooth device.
    Notes
    The Bluetooth standby function will be turned off
    automatically when the side stand is closed.
    If the system is being powered by battery, even if the
    system is turned off, battery power will continue to be
    consumed if the BLUETOOTH STANDBY switch is set to ON.
    Pattern C
    Connecting with a smartphone
    by One touch (NFC)
    By just touching the system with an NFC compatible
    smartphone, the system is turned on automatically and then
    paired and connected with the smartphone.
    1 Download and install the app “NFC Easy
    Connect” on the smartphone.
    “NFC Easy Connect” is an original app by Sony for Android
    phones, and is available at Google Play Store.
    Search for “NFC Easy Connect” or scan the following two-
    dimensional code to download and install the free app.
    Communication fees are required to download the app.
    The app may not be downloadable in some country/
    regions.
    Tip
    For some smartphones, One touch connection may be
    available without downloading the app “NFC Easy Connect.
    In that case, the operation and specifications may be
    different from the description here. For details, refer to the
    operating instructions supplied with the smartphone.
    By the two-dimensional code:
    Use a two-dimensional code reader app.
    Compatible smartphones
    Smartphones with the NFC function built-in
    (OS: Android 2.3.3 or later, excluding Android 3.x)
    About NFC
    NFC (Near Field Communication) is a technology enabling
    short-range wireless communication between various
    devices, such as mobile phones and IC tags. Thanks to the
    NFC function, data communication can be achieved easily
    just by touching the relevant symbol or designated
    location on NFC compatible devices.
    2 Start the app “NFC Easy Connect on the
    smartphone.
    Make sure that the application screen is displayed.
    3 Touch the system with the smartphone.
    Keep touching the smartphone on the N marked part of
    the system until the smartphone vibrates.
    Smartphone vibrates
    (system recognized)
    Lights up
    Follow the on-screen instructions to establish the
    connection.
    When the Bluetooth connection is established, the
    Bluetooth indicator (blue) stays on.
    Tips
    If it is difficult to establish the connection, try the following.
    Activate the app “NFC Easy Connect” and move the
    smartphone slightly on the N marked part of the system.
    If the smartphone is in a case, remove it.
    Touch the system with the smartphone again to disconnect.
    If you have multiple NFC compatible devices, just touch the
    smartphone to a different device to switch the connection
    to that device. For example, when your smartphone is
    connected with NFC compatible headphones, just touch the
    smartphone to the system to change the Bluetooth
    connection to the system (One touch connection switching).

Имате ли въпрос относно Sony SRS-BTX300?

Задайте въпроса, който имате за Sony SRS-BTX300 тук направо на други собственици на продукта. Дайте ясно и изчерпателно описание на проблема и Вашия въпрос. Колкото по–добре опишете проблема си и зададете въпроса си, толкова по–лесно другите собственици на Sony SRS-BTX300 ще могат да Ви дадат добър отговор.

Тук вижте безплотното ръководство за Sony SRS-BTX300. Прочетохте ли ръководството, но отговаря ли то на Вашия въпрос? Тогава задайте въпроса си на тази страница на други собственици на Sony SRS-BTX300.

Спецификации на продукта

Марка Sony
Модел SRS-BTX300
Продукт Bluetooth тонколона
EAN 4905524905700
Език Английски
Вид файл PDF
Дизайн
Цвят на продукта Бяла

Купете свързани продукти:

    Свързани продукти

    Bluetooth тонколона Sony