Sony XDR-V1BTD ръководство на потребителя

Sony XDR-V1BTD
(1)
  • Брой стр.: 2
  • Вид файл: PDF
XDR-V1BTD [GB] 4-587-913-15(1)
Listening to a preset station
Note
To prevent the preset from being changed by mistake,
do not hold down the preset button.
Presetting stations (5 DAB and 5 FM)
Connecting with a BLUETOOTH device
1
Tune to the station you want to preset.
Follow the steps in “Listening to the Radio” above.
2
Press and hold the desired preset button (1–5) until “Stored to [PRESET x].”
appears on the display.
Tips
• If you try to store another station with the same preset
number, the previously stored station will be replaced.
• The preset stations remain in the unit’s memory even after an
auto tune is performed.
• The preset button 3 on the unit has a tactile dot. Use the
tactile dot as a reference when operating the unit.
Example: Presetting a tuned station to the preset button 3

Listening to the Radio

Setting the On Timer

Listening to Music from a BLUETOOTH Device

Hour

Getting Started

Tips
• The power indicator lights up in green while the unit is turned on. To set the unit to standby mode,
press again.
• To cancel the auto tune process while in progress, press BACK.
• To perform auto tune again later, see “To make a new station list” below.
If it is the first time the unit is turned on,
DAB auto tune is performed automatically.
Example: When the preset button 3 is pressed
To DC IN
AC adaptor
(supplied)
The built-in battery will be fully
charged (“
”) in up to 6 hours.
1
Select the “DAB” or “FM” function.
2
Select the desired preset station.
BACK
1
Turn on the unit, and select the “DAB” or “FM” function.
2
Select a desired station or
service.
Station currently
being received
Secondary service
(after the “L mark)
Selected
station
Press ENTER.
Press ENTER.
Scrolling text
(DLS: Dynamic Label Segment of
up to 128 characters)
“SC” lights up when
a secondary service
is received.
Station name*
Scrolling text
(RT: Radio Text of up to 64
characters)*
* Displayed only when RDS data has been received.
1
Turn on the unit, and select the “Bluetooth” function.
1
Turn on the NFC function of
the BLUETOOTH device.
1
Start playback on the BLUETOOTH device.
2
Select “Bluetooth pairing.”
3
On the BLUETOOTH device, activate the BLUETOOTH function
and perform the pairing procedure.
2
Touch the BLUETOOTH device
to the N-Mark on the unit.
2
Adjust the volume.
Connecting by One-touch (NFC)
Listening to music
If your BLUETOOTH device has an NFC function, this procedure is unnecessary.
See “Connecting by One-touch (NFC)” below.
Turn the TUNE dial to select
an option.
Press ENTER.
Perform the same procedure
for the following steps.
When using the unit for the first time (if there is no pairing information in the unit)
The unit will automatically switch to pairing mode. In
this case, proceed to step 3.
When connecting with the second and subsequent devices
Proceed to step 2.
Using the BLUETOOTH connection, you can listen to music from wirelessly connected
BLUETOOTH devices such as smartphones, tablets, PCs, etc.
When pairing is completed, the BLUETOOTH
device’s name will appear on the display.
For details, refer to the operating instructions supplied with
the BLUETOOTH device.
If you are prompted to enter a passkey, enter “0000.
Compatible smartphones
NFC-compatible smartphones with
Android™ 4.1 or later installed
NFC
NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as smartphones
and IC tags. Thanks to the NFC function, data
communication – for example, BLUETOOTH
pairing – can be achieved easily by simply
touching NFC-compatible devices together (i.e.,
at the N-Mark symbol or location designated on
each device).
appears on the display.
The radio turns on at the set time.
To deactivate the timer
Press ON TIMER again.
Wall outlet
When setting to the last received station
When selecting from the preset station list
When pairing is completed, the
BLUETOOTH device’s name will
appear on the display.
To terminate the BLUETOOTH connection
Touch the BLUETOOTH device to the
N-Mark on the unit.
Tip
After pressing FUNCTION once, you can also select a
function by turning the TUNE dial and pressing ENTER.
Power indicator
TUNE dial
Press repeatedly.
Station currently
being received
Station name* Selected
station
See “Setting Menu Options” for manual tuning.
You can set the unit to turn on the radio automatically at the set time.
Minute
Press repeatedly.
Display
Display
To improve DAB/FM radio receptionTo adjust the volumeTo make a new station list
If you have moved to another region, perform the auto tune again.
Select the “DAB” or “FM”* function, then press AUTO TUNE.
Notes
• The currently stored station list will be cleared once the auto tune process has started.
• When the setting menu is displayed, auto tune is not performed even when AUTO TUNE is pressed.
Select “OK” to start the
auto tune process.
The unit receives the first station
in the new station list.
* Only when the tuning mode is set to “By station list.
When AUTO TUNE is pressed in “Manual tune” mode,
scan tuning will start instead. See “Setting Menu Options”
for details.
The unit receives the first station
in the new station list.
Press repeatedly.
1
Press SETTINGS.
2
Select “On timer.”
3
Set the hour and minute.
4
Set the station received at the set time.
5
Activate the timer.
Compatible BLUETOOTH devices
Compatibility requirements for the devices are as follows.
Before using a device with this unit, check that it meets
the requirements.
• Devices must support A2DP (Advanced Audio
Distribution Profile) and AVRCP (Audio/Video Remote
Control Profile).
• NFC capability (required only when using the NFC
pairing function of the unit).
1
Connect the unit to a wall outlet and charge the unit.
2
Extend the antenna.
3
Turn on the unit.
After auto tune is completed, the unit receives
the first station in the DAB station list.
Tip
When selecting from the
preset station list, set the
stations first. See “Presetting
stations (5 DAB and 5 FM)” for
details.
When using the unit for the first time, make sure to connect the unit to a wall outlet
using the AC adaptor (supplied). Otherwise the unit will not turn on.
ENTER
The unit automatically
switches to the selected
function in about 2 seconds.
The unit automatically
switches to the selected
function in about 2
seconds.
Select “XDR-V1BTD.” If “XDR-V1BTD” does not
appear, perform a search of the device.
To terminate the BLUETOOTH connection
Select the function other than the BLUETOOTH
function.
Press ENTER. Press ENTER. Press ENTER. Press ENTER.
Press ENTER.
Tips
• The last set volume is stored in the unit’s memory.
• VOL + on the unit has a tactile dot. Use the tactile
dot as a reference when operating the unit.
Press ENTER.
Press ENTER.
Press ENTER, and
press SETTINGS to
exit the setting
menu.
Note
The On Timer function is disabled in off mode.
When the sleep timer is set, “SLEEP” appears
on the display.
The unit enters standby mode automatically
after a set time has elapsed.

Setting the Sleep Timer

Press SLEEP repeatedly to select the desired time (in minutes).
About the BLUETOOTH standby mode
The BLUETOOTH standby mode enables the unit to turn
on automatically by making a BLUETOOTH connection
from a BLUETOOTH device.
See “Setting Menu Options” for details.
Press SETTINGS.
Turn the TUNE dial to select
an option.
Press ENTER.
“Waiting for pairing” appears
on the display.
If it is the first time the “FM” function is selected,
FM auto tune is performed automatically.
Tips
• To cancel the auto tune process while in progress, press BACK.
• To perform auto tune again later, see “To make a new station list” below.
• It may take a long time to receive FM station names. To perform this process later, see “Setting Menu
Options.
• FM station names will be received and stored in the unit while you are listening to the broadcasts, even if
you have not received them during the auto tune process.
• FM station names may not be transmitted, depending on the station.
Turn the TUNE dial to select “Now”
or “Later.
Press ENTER.
BACK
Tip
BLUETOOTH wireless technology operates
within a range of about 10m.
When setting in standby mode
Tips
• The last set time is stored in the unit’s memory.
• You can check the time left until the unit enters standby mode by pressing SLEEP again after
setting the sleep timer.
The last connected
device will be connected
automatically.
If there is pairing information in the unit

DIGITAL RADIO DAB/FM

with Bluetooth SPEAKER

Operating Instructions
©2016 Sony Corporation Printed in China
4-587-913-15(1)
XDR-V1BTD
Sony XDR-V1BTD

Имате ли въпрос относно Sony XDR-V1BTD?

Брой въпроси: 0

Задайте въпроса, който имате за Sony XDR-V1BTD тук направо на други собственици на продукта. Дайте ясно и изчерпателно описание на проблема и Вашия въпрос. Колкото по–добре опишете проблема си и зададете въпроса си, толкова по–лесно другите собственици на Sony XDR-V1BTD ще могат да Ви дадат добър отговор.

Тук вижте безплотното ръководство за Sony XDR-V1BTD. Прочетохте ли ръководството, но отговаря ли то на Вашия въпрос? Тогава задайте въпроса си на тази страница на други собственици на Sony XDR-V1BTD. Задайте въпроса си тук

Спецификации на продукта

Няма нужда да купувате външни високоговорители, за да получите чудесен звук. Благодарение на вградените високоговорители...
Общи
Марка Sony
Модел XDR-V1BTD
Продукт Радиочасовник
Език Английски
Вид файл PDF
Радио
Тип радио Преносим
Тип тунер -
Поддържани радио вълни DAB,DAB+,FM
Диапазон на FМ радио вълни 87.5 - 108 MHz
Други характеристики
FM радио
Съвместим с Apple докинг станция -
Аудио вход 1
Тонколони
Вграден високоговорител/и
Брой вградени говорители 2
Задвижващ блок 45 мм
Дисплей
Вграден дисплей
Мрежови възможности
Bluetooth
Комуникация в близко поле (NFC)
Портове и Интерфейси
Изходи за слушалки 1
Вход за постоянен ток (DC-in)
Характеристики
MP3 възпроизвеждане -
Цвят на продукта Кафяв
Регулиране силата на звука Цифров
Стенен/настолен часовник
Вграден часовник
Тегло и размери
Ширина 106 мм
Дълбочина 117 мм
Височина 172 мм
Тегло 860 г
Батерия/акумулатор
Технология на батерията Литиев
Максимален живот на батерията 25 ч
Мощност
Тип на източник за захранване Батерия
Покажи повече

Често задавани въпроси

По-долу ще намерите най-често задаваните въпроси за Sony XDR-V1BTD.

Не можете ли да откриете въпроса си? Задайте въпроса си тук